Loading... Please wait...

Off-Set Tatter Unique Pattern 800-841

$16.95

Pattern Description

The Off-set Tatter Pattern skirt inset line on this design is off-set to the middle on the front of the skirt. The skirt inset is symetrical on the back panel. Tatters drop off to the side acenting the off-set line of the bodice.

View 2

Fitted drop sleeve

Zippered back

Product Reviews

Write Review

  1. Good and manageable pattern

    Posted by Unknown on 6th May 2014

    Overerall, the pattern is decent and usable. Its not your top of the line pattern with super descriptive and illustrated instructions, But it is definitely manageable. As long as you have some experience with working with patterns and sewing, you should be fine working with this pattern. It is very easy to contact the seller and ask questions! The pattern is definitely unique. Its hard to find any patterns similar to these! I am satisfied with the quality, if anything its the price that is a bit too high but then again its a very unique pattern.

Pattern Options
Quantity:


Off-Set Tatter Unique Pattern 800-841
Pattern Views
  • Image 1
  • Image 2
You may also like these patterns
Hints and Tips

1. Don't forget all set-in sleeves in a size group are interchangeable... All raglan sleeves in a size group are interchangeable too.

2. Anything you can think of, you can create! Check out the Manual, it's full of design possibilities.

3. It easy to mix and match bodices and skirts with the same inset line within the same sizing group. You can also change the skirt inset line from bodice to bodice with the skirt conversion package.

4. We always like to see photos of what our clients are doing. Check out our Facebook link and post a photo of you latest project... or e-mail a photo to us. We'll post it to the gallery!!! Become the next creation of the month.

Measurements and Sizeing Get more info here.
The BODY measurement is done by placing the end of tape measure at the indent of the top of the rib cage, bringing the tape down the front of the body, through the crotch and up the back at the spine to the large axis bone at the base of the neck. Make sure the tape measure is firm (not drawn tightly) against the body, including the small of the back.
The NECK TO WAIST measurement is done be placing the tape measure at the axis and measuring down the spine to the natural waistline (not where your skater prefers to wear his or her pants). The natural waistline is the narrowest indent of the torso of the body.
The CHEST and HIP are measured around the body at the fullest point. The WAIST is measured at the natural indent of the torso of the body. The ARM is measured from the tip of the shoulder to the bottom of the wrist bone. Measure the WRIST to include the fullness of the wrist bone. The UPPER ARM is measured at the fullest point around the muscle.
SSW sizing is not the same as any other manufacturer. Our patterns are "NOT GRADED" up or down from one pattern to make a dozen different sizes. For over 25 years our patterns have been produced with the developing body in mind. We feel its important that the performer feels confident with what their wearing. A good fit promotes a good performance.
Fabric

The ideal fabric is any LYCRA® that stretches 4 ways and has a fabric content of 80% Nylon and 20% Spandex. With any and all LYCRA® fabrics the greater stretch needs lay up/down body and the lesser stretch needs to lay across the body to allow the proper flexion of the body and fabric together. To find out more about specific LYCRA® fabrics, get more info here.

Thread

Use 100% polyester thread.

Elastic

Regular weight LYCRA® use 1/4" knit non-roll elastic. For Spandex® heavy or velvet LYCRA® use 3/8" unit non-roll elastic.

Zippers

Use 22" invisible zippers for all dress, unitards, dresstards, leotard when necessary. For Men/Boys Pants use 5" or 7" zippers. For Cover Up Jackets use separating jacket zippers in the proper length.

 

resorces

contact

Newsletter